|
FURNACES UP TO 1200°C
|
|
MODEL
|
CHAMBER SIZE
(INSIDE WORKING)
|
POWER
|
| |
WIDTH
|
HEIGHT
|
DEPTH
|
950°
C
|
1150°C
|
1200°C
|
| SMF-3 |
100 mm
|
100 mm |
225 mm |
1.8
kw |
2.0 kw |
2.2 kw |
| SMF-4 |
125 mm |
125 mm |
250 mm |
2.0 kw |
3.0 kw |
3.5 kw |
| SMF-6 |
150 mm |
150 mm |
300 mm |
3.0 kw |
4.5 kw |
4.8 kw |
| SMF-12 |
200 mm |
200 mm |
300 mm |
4.5 kw |
4.5 kw |
4.8 kw |
| SMF-27 |
300mm |
300 mm |
300 mm |
6.0 kw |
6.0 kw |
7.5 kw |
| SMF-54 |
300mm |
300 mm |
600 mm |
7.5 kw |
7.5 kw |
9.0 kw |
| POWER
SUPPLY |
220
V,1 PHASE , 2 WIRE, UP TO 3.0 KW
415 VOLTS ,3 PHASE ,4 WIRE ABOVE 3.0 KW |
|
| |
| TECHICNAL SPECIFICATION |
|
SHELL OF THE FURNACE :
THE SHELL OF THE FURNACE WOULD BE FABRICATED OUT OF 1.2
MM THICK MILD STEEL SHEETS REINFORCED WITH MINIMUM 35 X
35 X 5 MM ANGLES. THE FRONT OF THE FURNACE WOULD BE
FABRICATED
OUT OF 1.6 MM THICK MILD SHEETS. ALL MILD STEEL MEMBERS
WILL BE WELDED AND OR BOLTED TOGETHER AS PER OUR STANDARD
PRACTICE, WHENEVER REQUIRED TO CONSTRUCT A STURDY STRUCTURE.
|
HEATING CHAMBER
THE HEATING CHAMBER WILL BE MADE OUT
OF CAST REFRACTORY MUFFLE . MUFFLE WILL BE CAST WITH SPECIAL
GRADE REFRACTORY CEMENT TO WITHSTAND TEMPERATURE UP TO 1300
DEG.C. |
|
HEATING ELEMENTS
SPIRALLY SHAPED,HELICAL WOULD HEATING
ELEMENT WILL BE MADE OUT OF SUITABLE GRADE OF FE.CR.AL.HEATING
ELEMENT ALLOY WIRE ,HAVING SUFFICIENT CROSS SECTION AND
DESIGNED TO OPERATE OF SAFEST SURFACE WATT LOADING FOR ENHANCE
ELEMENT LIFE.
|
INSULATION
THE HEATING CHAMBER WOULD BE INSULATED
WITH A VARIOUS LAYERS OF COLD AND / OR HEAT FACE INSULATING
BRICKS FOLLOWED BY CERAMIC / MINERAL WOOL INSULATING MATERIAL
AS PER OUT STANDARD PRACTICE. |
CONTROLS
THE FURNACE WILL BE CONTROLLED WITH
A THERMOCOUPLE SENSED DIGITAL TEMPERATURE CONTROLLER AND AIR
BRAKE MAGNETIC CONTACTOR THIS CONTROL EQUIPMENTS / INSTRUMENTS
WILL BE RPOVIDED JUST BELOW THE FURNACE CHAMBER. |
|
|
FURNACES UP TO 1700°C
|
|
MODEL
|
CHAMBER SIZE
(INSIDE WORKING)
|
POWER
|
| |
WIDTH
|
HEIGHT
|
DEPTH
|
1400°
C
|
1450°C
|
1500°C
|
| HSMF-3 |
100 mm
|
100 mm |
225 mm |
2.0
kw |
3.0 kw |
3.5 kw |
| HSMF-4 |
125 mm |
125 mm |
250 mm |
3.0 kw |
4.5 kw |
4.8 kw |
| HSMF-6 |
150 mm |
150 mm |
250 mm |
4.5 kw |
4.5 kw |
4.8 kw |
| HSMF-12 |
200 mm |
200 mm |
300 mm |
6.0 kw |
6.0 kw |
7.5 kw |
| HSMF-27 |
300mm |
300 mm |
300 mm |
7.5 kw |
7.5 kw |
9.0 kw |
| HSMF-54 |
300mm |
300 mm |
600 mm |
9.0 kw |
9.0 kw |
12.0 kw |
| POWER
SUPPLY |
220
V,1 PHASE , 2 WIRE,UP TO 4.8 KW
415 VOLTS ,3 PHASE ,4 WIRE UP TO 4.8 KW |
|
| |
| GENERAL FEATURES |
|
* SILICON CARBIDE HEATING ELEMENTS IN MATCHED
SETS ENSURE BETTER TEMPERATURE UNIFORMITY
& LONGER ELEMENT LIFE.
* ELEMENTS CAN BE MOUNTED HORIZONTALLY OR VERTICALLY.
* HOT FACE LINING MADE OF SPECIAL REFRACTORY BRICKS FOLLOWED
BY HIGH DENSITY CERAMIC FIBER
INSULATIONS OF
DIFFERENT GRADES.
* THYRISTORISED POWER CONTROL.
* MICRO - PROCESSOR BASED PID TEMPERATURE CONTROLLER / PROGRAMMER
WITH THERMOCOUPLE
& THROUGH REAR / ROOF OF HEATING CHAMBERS.
|
|
|
